Asus GigaX3124 - Manual (Page 55)

GigaX3124 Layer3 Switch CLI Command Reference
30
3.3 default-priority <0-7>
Syntax default-priority <0-7>
Parameters <0-7> Cos priority
Command Mode Interface configuration mode
No/clear
no default-priority
Show show running-config
Default The default is 0
Description Use the default priority configuration command on the switch
stack or standalone switch to set default cos priority of the port.
Examples ASUS(config-if)# default-priority 3
3.4 description LINE
Syntax description LINE
Parameters LINE Characters describing this interface
Command Mode Interface configuration mode
No/clear
no description
Show show interface status
Default None
Description Use the description command on the switch stack or standalone
switch to set description of the port.
Examples ASUS(config-if)# description server
3.5 duplex (full|half)
Syntax duplex (full|half)
Parameters full Force the interface in full-dupex mode
half Force the interface in half-dupex mode
Command Mode Interface configuration mode
No/clear
no duplex
Show show interface IFNAME
Default The default is full