Asus GigaX3124 - Manual (Page 60)

GigaX3124 Layer3 Switch CLI Command Reference
35
Description Use the command to set the port to be a routed port. A routed port
is a L3 interface can configure IP and routing.
Examples ASUS(config)# interface gi1/0/1
ASUS(config-if)# no switchport
3.16 shutdown
Syntax shutdown
Parameters
Command Mode Interface configuration mode
No/clear
no shutdown
Show show running-config
Default
Description
The shutdown command for a port causes it to stop forwarding.
You can enable the port with the no shutdown command.
In L3 model, the command also can stop forwarding for a L3
interface.
Examples ASUS(config-if)# shutdown
3.17 speed (10|100|1000)
Syntax speed (10|100|1000)
Parameters 10 Force the interface in 10 Mbps
100 Force the interface in 100 Mbps
1000 Force the interface in 1 Gbps
Command Mode Interface configuration mode
No/clear
no speed
Show show interface IFNAME
Default
Description
Use the speed configuration command on the switch stack or
standalone switch to set speed status of the port.
Examples ASUS(config-if)# speed 100