Asus GigaX3124 - Manual (Page 93)

GigaX3124 Layer3 Switch CLI Command Reference
68
11 LACP Configuration:
11.1 lacp aggregation-link group <1-8> (add|set)
IFLIST
Syntax lacp aggregation-link group <1-8> (add|set) IFLIST
Parameters <1-8> GROUPID
add Add interfaces to LACP group
set Set interfaces for LACP group
IFLIST Interface list
Command Mode Global configuration mode
No/clear
lacp aggregation-link group delete IFNAME
no lacp aggregation-link group <1-8>
Show show aggregation-link group [GROUPID]
Default
Description
This command sets the Link Aggregation Control Protocol (LACP)
operation add/set for the aggregation-link group ports on the
switch stack or on a standalone switch.
Example ASUS(config)# lacp aggregation-link group 2 add gi1/0/1-4
11.2 lacp aggregation-link group <1-8> delete
IFNAME
Syntax lacp aggregation-link group <1-8> delete IFNAME
Parameters <1-8> GROUPID
delete Remove interface from LACP group
IFNAME Interface name
Command Mode Global configuration mode
No/clear
Show
show aggregation-link group [GROUPID]
Default