Asus GigaX3124 - Manual (Page 92)

GigaX3124 Layer3 Switch CLI Command Reference
67
Default
Description
Use the aggregation-link group configuration command on
the switch stack or standalone switch to configure static
link aggregation load balancing by using source-based or
destination-based forwarding methods.
Example ASUS(config)# aggregation-link group 1 load-balance src-mac
10.3 show aggregation-link group [GROUPID]
Syntax show aggregation-link group [GROUPID]
Parameters [GROUPID] Trunk Group ID
Command Mode Privileged EXEC mode
No/clear
Show
Default
Description
To show aggregation-link trunk status.
Example ASUS# show aggregation-link group 1