Asus GigaX3124 - Manual (Page 252)

GigaX3124 Layer3 Switch CLI Command Reference
227
19.9 switchport port-security reup
Syntax switchport port-security reup
Parameters
Command Mode Interface configuration mode
No/clear
Show
show port-security [IFNAME]
Default
Description
To reup the interface when it was shutdown by port security
Examples ASUS(config-if)# switchport port-security reup
19.10 switchport port-security shutdown <10-1440>
Syntax switchport port-security shutdown <10-1440>
Parameters <10-1440> Shutdown time, in minutes
Command Mode Interface configuration mode
No/clear
no switchport port-security shutdown
Show show port-security [IFNAME]
Default Shutdown until re-up
Description To configure maximum shutdown time for the interface
Examples ASUS(config-if)# switchport port-security shutdown 30
19.11 switchport port-security violation
(protect|restrict|shutdown)
Syntax switchport port-security violation (protect| restrict| shutdown)
Parameters protect Protect mode, drop packets when security violation
occurs
restrict Restrict mode, notify user when security violation
occurs
shutdown Shutdown mode, shutdown this port when security
violation occurs (default)