Asus GigaX3124 - Manual (Page 184)

GigaX3124 Layer3 Switch CLI Command Reference
159
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit icmp host 10.0.0.1 host 10.0.0.2 2
code 2 [gi1/0/1]
13.77 (permit|deny) (ip|tcp|udp|icmp) IPADDR
MASK IPADDR MASK [IFNAME]
Syntax (permit|deny) (ip|tcp|udp|icmp) IPADDR MASK IPADDR MASK
[IFNAME]
Parameters permit Specify packets to forward
deny Specify packets to reject.
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
icmp Internet Control Message Protocol
IPADDR Source address
MASK Source wildcard bits
IPADDR Destination address
MASK Destination wildcard bits
[IFNAME] Egress interface name
Command Mode IP extended access-list mode
No/clear
no (permit|deny) (ip|tcp|udp|icmp) IPADDR MASK IPADDR
MASK [IFNAME]
Show show access-lists [ACLNAME]
Default
Description
This command specifies one or more conditions denied or
permitted to decide if the packet is forwarded or dropped.
Examples ASUS(config-ext-acl)# permit ip 10.0.0.1 0.0.0.0 10.0.0.2 0.0.0.0
[gi1/0/1]