Asus GigaX2024SX - Manual (Page 113)

Address Table Settings
Switches store the addresses for all known devices. This information is used to
re bound to a specific port.
ddress can be assigned to a specific interface on this switch. Static
ally configured addresses.
ress.
pass traffic directly between the inbound and outbound ports. All the addresses
learned by monitoring traffic are stored in the dynamic address table. You can
also manually configure static addresses that a
Setting Static Addresses
A static a
addresses are bound to the assigned interface and will not be moved. When a
static address is seen on another interface, the address will be ignored and will
not be written to the address table.
Command Attributes
• Static Address Counts* – The number of manu
• Current Static Address Table – Lists all the static addresses.
• Interface – Port or trunk associated with the device assigned a static add
• MAC Address – Physical address of a device mapped to this interface.
• VLAN – ID of configured VLAN (1-4094).
* Web Only
Web – Click Address Table, Static Addresses. Specify the interface, the MAC
address and VLAN, then click Add Static Address.
Figure 3-53. Configuring a Static Address Table
3-88