Asus GigaX2024SX - Manual (Page 169)

4 Chapter 4: Command Line Interface
This chapter describes how to use the Command Line Interface (CLI).
Using the Command Line Interface
A
W
to
itch can be
by entering command keywords and parameters at the prompt. Using
the switch's command-line interface (CLI) is very similar to entering commands on
a UNIX system.
Console Connection
itch through the console port, perform these steps:
prompt, enter the user name and password. (The default user
trator user name and password is entered, the CLI
the “Console#” prompt and enters privileged access mode (i.e.,
Privileged Exec). But when the guest user name and password is entered, the CLI
displays the “Console>” prompt and enters normal access mode (i.e., Normal
Exe
2. Enter the necessary commands to complete your desired tasks.
d, exit the session with the “quit” or “exit” command. After
connecting to the system through the console port, the login screen displays:
ccessing the CLI
hen accessing the management interface for the switch over a direct connection
the server’s console port, or via a Telnet connection, the sw
managed
To access the sw
1. At the console
names are “admin” and “guest” with corresponding passwords of “admin” and
“guest.”) When the adminis
displays
c).
3. When finishe
4-1