Asus GigaX2024SX - Manual (Page 277)

no interface port-channel channel-id
interface
• ethernet unit/port
1.
• port-channel channel-id (Range: 1-4)
4)
d Mode
Glo
To specify port 24, enter the following command:
- unit - This is device
- port - Port number.
• vlan vlan-id (Range: 1-409
Default Setting
None
Comman
bal Configuration
Example
description
This command adds a description to an interface. Use the no form to remove the
description.
Syntax
description string
no description
omment or a description to help you remember what is attached
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
The following example adds a description to port 24.
string - C
to this interface. (Range: 1-64 characters)
Default Setting
speed-duplex
This command configures the speed and duplex mode of a given interface when
autonegotiation is disabled. Use the no form to restore the default.
Syntax
speed-duplex {1000full | 100full | 100half | 10full | 10half}
no speed-duplex
• 1000full - Forces 1000 Mbps full-duplex operation
4-109