Asus GigaX2024SX - Manual (Page 254)

dot1x timeout quiet-pe
This command sets the time riod
that a switch port waits after the Max Request Count
has been exceeded before attempting to acquire a new client. Use the no form to
dot1x timeout quiet-period seconds
1x timeout quiet-period
1-65535)
D
C
reset the default.
Syntax
no dot
seconds - The number of seconds. (Range:
efault
60 seconds
ommand Mode
Interface Configuration
Example
d
T
re
S
seconds
D
Mode
Interface Configuration
Example
ot1x timeout re-authperiod
his command sets the time period after which a connected client must be
-authenticated.
yntax
dot1x timeout re-authperiod
no dot1x timeout re-authperiod
seconds - The number of seconds. (Range: 1-65535)
efault
3600 seconds
Command
4-86