Lacp system-priority, Lacp system-priority -126, Private vlans – Asus GigaX2024SX User Manual
Page 294
lacp system-priority
This command c
rest
defau
onfigures a port's LACP system priority. Use the no form to
lt setting.
er} system-priority priority
rtner} system-priority
The local side an aggregate link.
ide of an aggregate link.
-65535)
ration (Ethernet)
Usage
• Port must be configured with the same system priority to join the same LAG.
• System priority is combined with the switch’s MAC address to form the LAG
identifier. This identifier is used to indicate a specific LAG during LACP
negotiations with other systems.
ore the
Syntax
lacp {actor | partn
{actor | pa
no lacp
actor -
•
• partner - The remote s
• priority - This priority is used to determine link aggregation group (LAG)
membership, and to identify this device to other switches during LAG
ange: 0
negotiations. (R
Default Setting
32768
Command Mode
ce Configu
Interfa
Command
4-126