Asus GigaX2024SX - Manual (Page 191)

show history
This command shows the contents of the command history buffer.
Non
is fixed at 10 Execution commands and 10 Configuration
Default Setting
e
Command Mode
Normal Exec, Privileged Exec
Command Usage
The history buffer size
commands.
Example
In this example, the show history command lists the contents of the command
history buffer:
The ! command repeats commands from the Execution command history buffer
when you are in Normal Exec or Privileged Exec Mode, and commands from the
Configuration command history buffer when you are in any of the configuration
modes. In this example, the !2 command repeats the second command in the
Execution history buffer (config).
reload
This command restarts the system.
Note: When the system is restarted, it will always run the Power-On Self-Test. It
will also retain all configuration information stored in non-volatile memory by the
copy running-config startup-config command.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
4-23