Asus GigaX2024SX - Manual (Page 48)

number of failed logon attempts. When the logon attempt threshold is reached,
the system interface becomes silent for a specified amount of time (set by the
Silent Time parameter) before allowing the next logon attempt.
(Range: 0-120; Default: 3 attempts)
on. When a connection
ompts for the password.
If you enter the correct password, the system shows a prompt. (Default: No
• Password* – Specifies a password for the line connecti
is started on a line with password protection, the system pr
password)
• Login* – Enables password checking at login. You can select authentication by
a single global password as configured for the Password parameter, or by
passwords set up for specific user-name accounts (Default: Local).
Web – Click System, Line, Telnet. Specify the connection parameters for Telnet
. access, then click Apply
Figure 3-14. Enabling Telnet
CLI – Enter Line Configuration mode for a virtual terminal, then specify the
c nnection parameters as required. To display the
o current virtual terminal settings,
use the show line command from the Normal Exec level.
3-23