Asus GigaX2024SX - Manual (Page 223)

Time Commands
dynamically set by polling a set of specified time servers
TP or SNTP). Maintaining an accurate time on the switch enables the system
gful dates and times for event entries. If the clock is not set,
p.
The system clock can be
(N
log to record meanin
the switch will only record the time from the factory default set at the last bootu
sntp client
This command enables SNTP client requests for time synchronization from NTP
sntp servers command. Use the no form
quests.
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the switch only records the time starting
from the factory default set at the last bootup (i.e., 00:00:00, Jan. 1, 2001).
• This command enables client time requests to time servers specified via the
sntp servers command. It issues time synchronization requests based on the
interval set via the sntp poll command.
Example
or SNTP time servers specified with the
to disable SNTP client re
Syntax
[no] sntp client
4-55