Asus GigaX2024SX - Manual (Page 182)

Related Commands
e (4-36)
pas
pass
cifies the password for a line. Use the no form to remove the
pas
Usage
• When a connection is started on a line with password protection, the system
rompts for the password. If you enter the correct password, the system shows a
password-thresh command to set the number of times
e line
onnection and returns the terminal to the idle state.
ncrypted password is required for compatibility with legacy password
settings (i.e., plain text or encrypted) when reading the configuration file during
syst
erver.
The
usernam
sword (4-17)
word
This command spe
sword.
Syntax
password {0 | 7} password
no password
• {0 | 7} - 0 means plain password, 7 means encrypted password
• password - Character string that specifies the line password.
(Maximum length: 8 characters plain text, 32 encrypted, case sensitive)
Default Setting
No password is specified.
Command Mode
Line Configuration
Command
p
prompt. You can use the
a user can enter an incorrect password before the system terminates th
c
• The e
em bootup or when downloading the configuration file from a TFTP s
re is no need for you to manually configure encrypted passwords.
Example
Related Commands
login (4-16)
Related Commands (4-20)
login response timeout
This command sets the interval that the system waits for a user to log into the CLI.
Use the no form to restore the default.
yntax
ds.
ange: 0-300; 0: no timeout)
S
timeout login response [seconds]
no silent-time
seconds - Integer that specifies the number of secon
(R
4-14