Asus GigaX2024SX - Manual (Page 185)

To set the silent time to 60 seconds, enter this command:
Related Commands
is command sets the number of data bits per character that are interpreted and
the console port. Use the no form to restore the default value.
r.
er character.
aracter
de
sp
er
ch
E
To specify 7 data bits, enter this command:
Related Commands (4-23)
databits
Th
generated by
Syntax
databits {7 | 8}
no databits
en data bits per characte • 7 - Sev
• 8 - Eight data bits p
Default Setting
8 da
r ch ta bits pe
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input from
vices that generate 7 data bits with parity. If parity is being generated,
p ecify 7 data bits per character. If no parity is required, specify 8 data bits
aracter.
xample
Related Commands
parity (4-23)
parity
This command defines the generation of a parity bit. Use the no form to restore
the default setting.
Syntax
| odd}
rity
rity
parity
parity {none | even
no parity
• none - No pa
• even - Even pa
• odd - Odd
Default Setting
No parity
4-17