Basic configuration, Displaying system information, Basic configuration -9 – Asus GigaX2024SX User Manual
Page 34: Displaying system information -9, D splayin, Ig system information
Basic Configuration
D splayin
y displaying the device name, location and
contact information.
Field Attributes
• System Name – Name assigned to the switch system.
• Object ID – MIB II object ID for switch’s network management subsystem.
• Location – Specifies the system location.
• Contact – Administrator responsible for the system.
• System Up Time – Length of time the management agent has been up.
These additional parameters are displayed for the CLI.
• MAC Address – The physical layer address for this switch.
• Web server – Shows if management access via HTTP is enabled.
nt access via HTTPS is enabled.
• Web secure server port – Shows the TCP port used by the HTTPS interface.
ace via
i
g System Information
You can easily identify the system b
• Web server port – Shows the TCP port number used by the web interface.
• Web secure server – Shows if manageme
• Telnet server – Shows if management access via Telnet is enabled.
• Telnet server port – Shows the TCP port used by the Telnet interface.
• Jumbo Frame – Shows if jumbo frames are enabled.
• POST result – Shows results of the power-on self-test
Web – Click System, System Information. Specify the system name, location, and
contact information for the system administrator, then click Apply. (This page also
includes a Telnet button that allows access to the Command Line Interf
Telnet.)
Figure 3-3. Displaying System Information
3-9