Asus GigaX2024SX - Manual (Page 310)

mits a configuration message.
Example
spanning-tree max-age
the spanning tree bridge maximum age globally for this
se the no form to restore the default.
Syn
sp
no spanning-tree max-age
sec
Range: 6-40 seconds)
The minimum value is the higher of 6 or [2 x (hello-time + 1)].
The maximum value is the lower of 40 or [2 x (forward-time - 1)].
uration message) becomes the designated port for the attached LAN. If
port, a new root port is selected from among the device ports
This command configures
switch. U
tax
anning-tree max-age seconds
onds - Time in seconds. (
Default Setting
20 seconds
Command Mode
Global Configuration
Command Usage
This command sets the maximum time (in seconds) a device can wait
withoutreceiving a configuration message before attempting to reconfigure. All
deviceports (except for designated ports) should receive configuration messages
atregular intervals. Any port that ages out STA information (provided in the
lastconfig
it is a root
attached to the network.
Example
4-142