Asus GigaX2024SX - Manual (Page 47)

Figure 3-13. Console Port Settings
n specify the connection
show line command from the Normal Exec level.
CLI – Enter Line Configuration mode for the console, the
parameters as required. To display the current console port settings, use the
Telnet Settings
You can access the onboard configuration program over the network using Telnet
(i.e., a virtual terminal). Management access via Telnet can be enabled/disabled
and other various parameters set, including the TCP port number, timeouts, and a
password. These parameters can be configured via the Web or CLI interface.
utes Command Attrib
• Telnet Status – Enables or disables Telnet access to the switch. (Default:
Enabled)
• Telnet Port Number – Sets the TCP port number for Telnet on the switch.
(Default: 23)
Login Timeout – Sets the interval that the sy • stem waits for a user to log into the
• r input is
detected. If user input t interval, the current
ession is terminated. (R 600 seconds)
Password Threshold – Sets the password intrusion threshold, which limits the
CLI. If a login attempt is not detected within the timeout interval, the connection is
s) terminated for the session. (Range: 0-300 seconds; Default: 300 second
– Sets the interval that the system waits until use Exec Timeout
is not detected within the timeou
ange: 0-65535 seconds; Default: s
•
3-22