Asus GigaX2024SX - Manual (Page 115)

Figure 3-54. Configuring a Dynamic Address Table
CLI – This example also displays the address table entries for port 1.
Changing the Aging Time
You can set the aging time for entries in the dynamic address table.
Command Attributes
• Aging Status – Enables/disables the function.
• Aging Time – The time after which a learned entry is discarded.
(Range: 10-30000 seconds; Default: 300 seconds)
Web – Click Addre
w aging time, click
pply.
ss Table, Address Aging. Specify the ne
A
3-90