Asus GigaX2024SX - Manual (Page 96)

Configuring LACP Parameters
Dynamically Creating a Port Channel –
orts assigned to a common po P rt channel must meet the following criteria:
ity.
• owever, if en the port
dmin Key m in a channel
If the port channel admin key (lacp admin key, page 4-171) is not set
(through the CLI) when a channel group is formed (i.e., it has a null value of 0),
this key is set to the same value as the port admin key used by the interfaces that
joined the group (lacp admin key, as described in this section and on page 4-170).
Command Attributes
Set Port Actor – This menu sets the local side of an aggregate link; i.e., the ports
on this switch.
• Port – Port number. (Range: 1-26)
• System Priority – LACP system priority is used to determine link aggregation
group (LAG) membership, and to identify this device to other switches during LAG
negotiations. (Range: 0-65535; Default: 32768)
- Ports must be configured with the same system priority to join the same LAG.
• Ports must have the same LACP System Prior
• Ports must have the same LACP port Admin Key.
H the “port channel” Admin Key is set (page 4-142), th
ust be set to the same value for a port to be allowed to jo A
group.
Note：
3-71