Asus GigaX2024SX - Manual (Page 18)

2 Chapter: Initial Configuration
e Switch
Configuration Options
The switch includes a built-in network management agent. The agent offers a
line interface (CLI).
ote: The IP address for this switch is unassigned by default. To change this
nd display statistics using a standard Web browser such as
etscape Navigator version 6.2 and higher or Microsoft IE version 5.0 and higher.
omputer
ttached to the network.
t on the switch, or remotely by a Telnet connection over the network.
(Simple Network
e managed from
g network management software such as HP
figuration program, and SNMP agent allow
r any port
through IEEE 802.1x security or static address filtering
up to 255 IEEE 802.1Q VLANs
Connecting to th
variety of management options, including SNMP, RMON and a Web-based
interface. A PC may also be connected directly to the switch for configuration and
monitoring via a command
N
address, see “Setting an IP Address” on page 2-4.
The switch’s HTTP Web agent allows you to configure switch parameters, monitor
port connections, a
N
The switch’s Web management interface can be accessed from any c
a
The CLI program can be accessed by a direct connection to the RS-232 serial
console por
The switch’s management agent also supports SNMP
Management Protocol). This SNMP agent permits the switch to b
any system in the network usin
OpenView.
The switch’s Web interface, CLI con
you to perform the following management functions:
• Set user names and passwords for up to 16 users
• Set an IP interface for a management VLAN
• Configure SNMP parameters
• Enable/disable any port
• Set the speed/duplex mode fo
• Configure the bandwidth of any port by limiting input or output rates
• Configure port access
• Filter packets using Access Control Lists(ACLs)
• Configure
• Enable GVRP automatic VLAN registration
2-1