Asus GigaX2024SX - Manual (Page 53)

Figure 3-17. Displaying System Logs
vel for
vel 7 - 0), and lists one sample error.
CLI – This example shows that system logging is enabled, the message le
flash memory is “errors” (i.e., default level 3 - 0), the message level for RAM is
“debugging” (i.e., default le
Resetting the System
Web – Click System, Reset to reboot the switch. When prompted, confirm that
you want reset the switch.
Figure 3-18. Resetting the System
CLI – Use the reload command to restart the switch. When prompted, confirm
that you want to reset the switch.
Note: When restarting the system, it will always run the Power-On Self-Test.
3-28