Asus GigaX2024SX - Manual (Page 175)

Exec Commands
When you open a new console session on the switch with the user name and
password “guest,” the system enters the Normal Exec command mode (or guest
mode), displaying the “Console>” command prompt. Only a limited number of the
commands are available in this mode. You can access all commands only from
the Privileged Exec command mode (or administrator mode). To access Privilege
Exec mode, open a new console session with the user name and password
“admin.” The system will now display the “Console#” command prompt. You can
also enter Privileged Exec mode from within Normal Exec mode, by entering the
enable command, followed by the privileged level password “super” (page 4-37).
To enter Privileged Exec mode, enter the following user names and passwords:
Configuration Commands
Configuration commands are privileged level commands used to modify switch
settings. These commands modify the running configuration only and are not
saved when the switch is rebooted. To store the running configuration in
non-volatile storage, use the copy running-config startup-config command.
4-7