Asus GigaX2024SX - Manual (Page 40)

Figure 3-7. IP Configuration using DHCP
Note: If you lose your management connection, use a console connection and
enter “show ip interface” to determine the new switch address.
CLI – Specify the management interface, and set the IP address mode to DHCP
or BOOTP, and then enter the “ip dhcp restart” command.
Renewing DCHP – DHCP may lease addresses to clients indefinitely or for a
specific period of time. If the address expires or the switch is moved to another
e address assigned by DHCP is no longer functioning, you will not be
address is still available.
CLI – Enter the following command to restart DHCP service.
network segment, you will lose management access to the switch. In this case,
you can reboot the switch or submit a client request to restart DHCP service via
the CLI.
Web – If th
able to renew the IP settings via the web interface. You can only restart DHCP
service via the web interface if the current
Managing Firmware
You can upload/download firmware to or from a TFTP server. By saving runtime
3-15