YSI P 700 IQ Analyzer User Manual
Page 26
Advertising
26
ba76133e01
09/2013
P 700 IQ
Fig. 3-3: Connecting the supporting pipes with the cross pipes
5
Connect both supporting pipes with each other using the two
square cross pipes (6). To do so, use the eight angle brackets (7)
and a total of twelve M8 hexagon head screws with plain washers
and locknuts.
6
Mount the four retaining hooks (8) on the stand mount. To do so,
use a total of twelve M8 hexagon head screws with large M8 plain
washers and locknuts.
Make sure that both triangular stabilizing sheets (5) are on
the inside.
6
7
Advertising