YSI P 700 IQ Analyzer User Manual
Page 87
Advertising
ba76133e01
09/2013
87
P 700 IQ
20
The tube is now in the dent. See Fig. 5-20, 87.
Fig. 5-20: Pump tube in the dent
21
Place the upper part of the pump head on the motor shaft. See
Fig. 5-21, 87.
Fig. 5-21: Positioning the upper part of the pump head
22
Arrange both halves of the pump head and then press them
together. See Fig. 5-22, 87.
Make sure that the tube is not pinched between both halves!
Fig. 5-22: Pressing together both halves of the pump head
Mounting the pump
23
Position the pump head on the pump drive in the analyzer.
Advertising