YSI P 700 IQ Analyzer User Manual
Page 47
Advertising
ba76133e01
09/2013
47
P 700 IQ
17
Confirm the note with <OK>.
The measured value display appears. While no valid measured
value is available, the display shows bars «- - - -».
18
Wait until a measured value is shown in the measured value dis-
play (approx. 5…7 minutes).
Fig. 3-23: Measured value display
19
Switch off the maintenance condition. See IQ S
ENSOR
N
ET
system operating manual.
After the initial commissioning, the P 700 IQ works with the
factory calibration. If the measured values are not as
expected, further actions and correction settings are avail-
able:
• Cleaning (in the calibration and service menu)
• Calibration, see section 4.2 Calibration, 54
• Offset correction
Advertising