3 measuring, 4 settings for the p 700 iq, 3 measuring 4.1.4 settings for the p 700 iq – YSI P 700 IQ Analyzer User Manual
Page 51
ba76133e01
09/2013
51
P 700 IQ
4.1.3 Measuring
The measured values are displayed in the measured value display on
the terminal.
Fig. 4-2: Measured value display
Tab. 4-1: Measured value display during cleaning or calibrating procedure
4.1.4 Settings for the P 700 IQ
Start the measuring operation so the measured values of the P 700 IQ
can be displayed (see section 4.1.2 Starting the measuring operation,
49). The P 700 IQ starts the first measurement immediately.
P 700 IQselect
1
Use the <M> key to switch to the measured value display as nec-
essary.
2
Using <>, select the P 700 IQ in the measured value display
as necessary.
3
Using <S>, switch from the measured value display to the main
menu of the sensor settings.
During an automatic cleaning or calibrating procedure, the
display shows CLEAN or CAL instead of a measured value.
Linked outputs are frozen.
Measured value
display
Function
CLEAN
Autom.cleaning is being carried out.
CAL
Autom.calibration is being carried out.