1 connecting the iq sensornet cable, Connecting the iq s, Ensor – YSI P 700 IQ Analyzer User Manual
Page 39: Cable, See section 3.3.5.1, 39, Section 3.3.5.1 connecting the iq s, Cable, 39, 1 connecting the iq s
Advertising
ba76133e01
09/2013
39
P 700 IQ
3.3.5.1 Connecting the IQ S
ENSOR
N
ET
cable
To connect the MIQ/WCA 232 to the IQ S
ENSOR
N
ET
, use the outward
right-hand connector of the terminal strip (“SENSORNET 1“). The con-
nection left of this one can be used for branching (“SENSORNET 2“).
Fig. 3-17: Terminal strip of the MIQ/WCA 232
1 Seal
2 Cable gland
Detailed information on the connection of the
IQ S
ENSOR
N
ET
cable to the MIQ/WCA 232 and on branch-
ing is given in the respective IQ S
ENSOR
N
ET
system oper-
ating manual, topic, “distributed mounting“.
SENSORNET 2
SENSORNET 1
SACIQ
SNCIQ
SNCIQ/UG
2
1
X6
X5
X4
SENSORNET 2
RED
SHIELD
GREEN
X3
X2
X1
SENSORNET 1
RED
SHIELD
GREEN
ON
OFF
SN
TERMINA
TO
R
Advertising