Gilderfluke&Co old Smart Brick Manual User Manual
Page 41
other Brick Brains out of this mode. The one Brick Brain which is in ECHO ALL MODE echoes any and all
characters sent to the Brick Brain through the serial port. This type of echo can be used to verify that the
Smart Brick System has received all characters sent to it. Note that since only one Brick Brain in the sys-
tem is in this mode at a time, that this form of echo only verifies the operation of this one Brick Brain and
no other parts of the system.
EXAMPLE: to put Brick Brain 00 into ECHO GLOBAL mode:
e 0 0
EXAMPLE: a typing random characters ÔapiuryhqpfnhsdflauthfÕ will echo:
apiuryhqpfnhsdflauthf
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒfÓ
Exit Echo All Mode:
This command takes all Brick Brains in the system out of ECHO ALL MODE.
EXAMPLE: to take any and all Brick Brains out of ECHO ALL MODE:
f
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒgÓ
Enter Echo Mode:
This command puts all the Brick Brains in the system into ECHO MODE. When in this mode, the char-
acters used to select all track-specific commands are echoed by the Brick Brain addressed by the com-
mand. This is the type of echo mode which best verifies the proper operation of all the Brick Brains in the
Smart Brick System.
EXAMPLE: to put Brick Brain 00 into ECHO MODE:
g 0 0
EXAMPLE: a 'START TRACK# 00' command will echo:
t00
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒhÓ
Exit Echo Mode:
This command takes all Brick Brains in the system out of ECHO MODE.
EXAMPLE: to take any and all Brick Brains out of ECHO MODE:
h
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒiÓ (track#)
Track Status Mode:
This command responds with a stream of ASCII HEX data containing the current status of the Brick
Brain specified by the TRACK#:
BYTE 1 & 2 = BRICK BRAIN STATUS
BIT 0 = STORED START RECEIVED
BIT 1 = CYCLING SHOWS FLAG
BIT 2 = DOING DELAY BETWEEN SHOWS
BIT 3 = DOING SHOW END
BIT 4 = LaserDisk CLOCKED SHOW
BIT 5 = EXTERNALLY CLOCKED SHOW
BIT 6 = SMPTE CLOCKED SHOW
BIT 7 = INTERNALLY CLOCKED SHOW
G
ILDERFLUKE
& C
O
.¥ 205 S. F
LOWER
S
T
.¥ B
URBANK
, CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥
FAX
818/840-9485
31 of 134