Gilderfluke&Co old Smart Brick Manual - Manual (Page 89)

- Rack Smart Brick Brain Delay Setup Menu -
This menu is used to set the sixteen possible different delays that can be accessed from the front
panel rotary switch. Any of these delays can be set anywhere between 00:00:00 and 99:59:59. If at the
start or end of a delay a length of zero is found, the delay will be stopped. If you want to disable all the
displays, you can simply enter zero lengths for all sixteen possible entries.
- Gilderfluke & Co. Rack Smart Brick Brain - rev. 1.13 copyright 1991-1998 DCM -
Delay Setup
0) delay 0- 00:00:00
1) delay 1- 00:00:15
2) delay 2- 00:00:30
3) delay 3- 00:01:00
4) delay 4- 00:02:00
5) delay 5- 00:03:00
6) delay 6- 00:05:00
7) delay 7- 00:07:30
8) delay 8- 00:10:00
9) delay 9- 00:15:00
A) delay A- 00:20:00
B) delay B- 00:25:00
C) delay C- 00:30:00
D) delay D- 00:40:00
E) delay E- 00:45:00
F) delay F- 01:00:00
m) more... o) load defaults x) eXit
enter command-
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
0-9, A-F Set Delays:
These commands are used to set the length of each of the sixteen possible delays.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒmÓ More.....:
This command allows you to select from the other menus:
1) Main Menu. This brings you back to this menu.
2) Show Setup. This will ask you which of the 255 possible shows you want to modify.
3) String Setup. This allows you to modify the strings used to control LaserDisks.
4) Delay. This allows you to set how long each of the sixteen possible countdown delays are.
5) Schedules. This is where you modify the ninety different possible schedules.
6) Calendar. This is where you select which schedule will be used on any day.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒoÓ Load Defaults:
This command allows you to reload the default configuration settings shown in the menu above.
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥
ÒxÓ eXit Setup Mode:
This command is used to exit the setup mode. If you hit this command in error, hitting an <ESC>ape
key will get you back to the setup mode. All of the setup commands which don't take effect immediate-
ly, take effect when the eXit command is entered. This includes things like the BAUD RATE, so you will
G ILDERFLUKE & C O .¥ 205 S. F LOWER S T .¥ B URBANK , CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX 818/840-9485
79 of 134