IAI America XSEL-KX - Manual (Page 308)

292
Appendix
1. I/O Parameters
No. Parameter name
Default value
(Reference)
Input
range
Unit Remarks
1 I/O port assignment type 1 0 ~ 20 0: Fixed assignment
1: Automatic assignment (Priority: Slot 1
(standard I/O) ~ * Ports are assigned only
for the installed adjoining slots, starting from
slot 1 = For safety reasons)
2 Input port start number with fixed
standard I/O assignments (I/O1) 000 -1 ~ 599 0 + (Multiple of 8) (Invalid if a negative value is
set)
3 Output port start number with fixed
standard I/O assignments (I/O1) 300 -1 ~ 599 300 + (Multiple of 8) (Invalid if a negative value
is set)
4 Input port start number with fixed
expanded I/O1 assignments (I/O2) -1 -1 ~ 599 0 + (Multiple of 8) (Invalid if a negative value is
set) (Slot next to the standard I/O slot)
5 Output port start number with fixed
expanded I/O1 assignments (I/O2) -1 -1 ~ 599 300 + (Multiple of 8) (Invalid if a negative value
is set)
6 Input port start number with fixed
expanded I/O2 assignments (I/O3) -1 -1 ~ 599 0 + (Multiple of 8) (Invalid if a negative value is
set)
7 Output port start number with fixed
expanded I/O2 assignments (I/O3) -1 -1 ~ 599 300 + (Multiple of 8) (Invalid if a negative value
is set)
8 Input port start number with fixed
expanded I/O3 assignments (I/O4) -1 -1 ~ 599 0 + (Multiple of 8) (Invalid if a negative value is
set)
9 Output port start number with fixed
expanded I/O3 assignments (I/O4) -1 -1 ~ 599 300 + (Multiple of 8) (Invalid if a negative value
is set)
10 Standard I/O error monitor (I/O1) 1 0 ~ 5 0: Do not monitor, 1: Monitor * Some
exceptions apply.
11 Expanded I/O1 error monitor (I/O2) 1 0 ~ 5 0: Do not monitor, 1: Monitor (Slot next to the
standard I/O slot) * Some exceptions apply.
12 Expanded I/O2 error monitor (I/O3) 1 0 ~ 5 0: Do not monitor, 1: Monitor * Some
exceptions apply.
13 Expanded I/O3 error monitor (I/O4) 1 0 ~ 5 0: Do not monitor, 1: Monitor * Some
exceptions apply.
14 Number of ports using network-I/F-
card remote input
0 0 ~ 256 Multiple of 8
15 Number of ports using network-I/F-
card remote output
0 0 ~ 256 Multiple of 8
16 (For future extension = Change
prohibited)
0 0 ~ 256 Multiple of 8
17 (For future extension = Change
prohibited)
0 0 ~ 256 Multiple of 8
18 ~
19
(For extension) 0
20 Input filtering periods 2 1 ~ 9 msec Input signal is recognized when the status is
held for twice the period set by this parameter.
21 Register input filtering periods 2 1 ~ 9 msec Input signal is recognized when the status is
held for twice the period set by this parameter.
22 Remote-I/O-card fieldbus ready
timeout value
2000 0 ~
99999
msec Timeout check is not performed if “0” is set.