IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 127)

16-2. Flash ROM writing
After the data in flash ROM has been erased, the data stored in the controller’s memory is written
in flash ROM.
Select the F1 (Flsh) key on the Ctl screen.
Mode flow:
When writing the data in flash ROM, press the F1
(OK) key.
When not writing the data in flash ROM, press the
F2 (Canc) or ESC key. The screen returns to the Ctl
screen.
The message “Please wait…” flashes during flash
ROM writing.
* Never turn off the power to the Controller during
this time.
When flash ROM writing is completed, the display
returns to the previous screen. (After parameter
editing and flash ROM writing, the screen moves to
the screen for software resetting [SRst].)
124