IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 67)

When checking and changing the movement
velocity, press the F3 (Jvel) key to move to the
screen for changing the velocity etc.
Enter the change data with the ten-key numeric pad
and press the return key. After changing, return to
the previous screen with the ESC key.
(In the figure at the left, the movement velocity is set
to 50 mm/sec.)
Note: Please take note that it may take a few
seconds before movement start after the
JOG key is pressed. (The time elapsed until
movement start varies according to the
number of registered position data.)
Movement velocity: 50 mm/sec.
64