IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 139)

APPENDIX
S
pecial remarks
Input dat
a
error
. Check the input dat
a.
T
oo-small input dat
a. Check the allowable input range.
T
oo-large input dat
a. Check the allowable input range.
SEL
command input error
. Invalid dat
a is input for the SEL
command.
Input-condition input prohibition e
rror
.
The Input condition is used in a step w
h
ere use of such condition is not allowed.
Input condition dat
a error
.
An invalid value is input for the input condition.
Input condition out-of-range error
.
A
value out of the input range is input for the input condition.
Input-condition no input error
. No input condition is input in the step w
h
ere such condition is essential.
Undefined symbol (input condition) use error
.
An undefined symbol is used for the input condition.
Operand 1 no input error
.
The operand 1 is not input in the step where the operand 1 is essential.
Operand 2 no input error
.
The operand 2 is not input in the step where the operand 2 is essential.
Operand 3 no input error
.
The operand 3 is not input in the step where the operand 3 is essential.
Operand 1 input prohibition error
.
The operand 1 is used in the step where use of the operand 1 is prohibited.
Operand 2 input prohibition error
.
The operand 2 is used in the step where use of the operand 2 is prohibited.
Operand 3 input prohibition error
.
The operand 3 is used in the step where use of the operand 3 is prohibited.
Operand 1 dat
a error
.
An invalid dat
a
is input for the operand 1. Check the dat
a.
Operand 2 dat
a error
.
An invalid dat
a
is input for the operand 2. Check the dat
a.
Operand 3 dat
a error
.
An invalid dat
a
is input for the operand 3. Check the dat
a.
Operand 1 input out-of-range error
.
A
value out of the allowable input range is input.
Operand 2 input out-of-range error
.
A
value out of the allowable input range is input.
Operand 3 input out-of-range error
.
A
value out of the allowable input range is input.
Operand 1 undefined symbol use error
.
An
undefined symbol is used for the operand 1.
Error message
Input dat
a error
Input dat
a tool small
Input dat
a too large
SEL
Cmnd Input Error
Inputting Conditions are not allowed Input Condition Dat
a Error
Input Condition is out of range No Input Condition yet Undefined Symbol (Input Condition) Operand not inputted (Oprnd1) Operand not inputted (Oprnd2) Operand not inputted (Oprnd3) Inputting Oprnd is not allowed (Oprnd1) Inputting Oprnd is not allowed (Oprnd2) Inputting Oprnd is not allowed (Oprnd3) Operand1 is invalid Operand2 is invalid Operand3 is invalid Inputted Operand is out of range (Oprnd1) Inputted Operand is out of range (Oprnd2) Inputted Operand is out of range (Oprnd3) Undefined symbol (Oprnd1)
X
-SEL
T
eaching
Box
E
rror
List
(Application
Part)
The following errors are specific to the
T
eaching Box. For cont
roller errors, refer to the X-SEL
Controller Instruction Manual.
)
Error No.
9C0 9C1 9C2 9C3 9C4 9C5 9C6 9C7 9C8 9C9 9CA 9CB 9CC 9CD 9CE 9CF 9D0 9D1 9D2 9D3 9D4 9D5
136