IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 25)

㽲 Data input for 1st point
Enter a numeric value of 0 and press the return
key. 0.000 is displayed, the axis No. changes to
2, and the cursor moves to the section for the
2nd-axis position data.
* The position data can be input up to a 4-digit integral number and three digits to the
right of the decimal. Since the range varies according to the actuator’s model, check it
in the catalog etc.
Enter 50 for the 2nd-axis position data and press
the return key. (* Every time the return key is
pressed, the cursor position moves. When you
make an input error, move the cursor to the
location where you have made the error and
overwrite the data.)
The input data can also be returned to X.XXX
with the F1 (Canc) key.
When the data is transferred with the WRT key,
the position No. is incremented by 1 and
becomes 2.
* When the screen is changed with the PAGE UP
and PAGE DOWN keys or ESC key before data
transfer, the input data becomes invalid.
㽳 Data input for 2nd point
Enter 50 for the 1st-axis position data and press
the return key.
Position No. 2
22