IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 93)

12-4. Copy and movement of program
The following operating instructions are to copy or move a program to another program No.:
Mode flow: Edit ĺProg
Select the F2 (Copy) key.
Enter the program No. from which a program is
copied or moved with the ten-key numeric pad and
press the return key.
Enter the program No. to which a program is copied
or moved with the ten-key numeric pad and press
the return key.
When copying the program, press the F1 (Copy)
key. When moving the program, press the F2
(Move) key.
Press the F1 (OK) key again.
When canceling it, press the ESC key.
Return to the previous screen with the ESC key.
Then, press the ESC key several times to return to
the Flsh screen.
Program No. from which a program is copied or moved
Program No. to which a program is copied or moved
90