IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 129)

16-5. Memory initialization
Global variables are cleared to zero.
Select the F4 (MClr) key on the Ctl screen.
Mode flow:
When initializing memory, press the F1 (OK) key.
(Even after memory initialization, the screen does
not change. Pressing the ESC key returns to the
previous screen.)
When not initializing memory, press the ESC key.
The display returns to the previous screen.
16-6. Reconnection
The Teaching Box is reconnected to the controller. In a communicable state, the off-line mode can
be moved to the on-line mode.
Select the F1 (Cnct) key on the Ctl screen.
Mode flow:
When reconnecting, press the F1 (OK) key.
When not reconnecting, press the ESC key.
The display returns to the previous screen.
The message “Please wait…” flashes during
reconnection.
After completion of reconnection, the display returns
to the Mode Selection screen.
126