IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 69)

㽲 Setting of user-specified output port parameters
For the operation method for parameter setting, refer to “14. Parameter Editing.”
The first port No. and the number of ports are set with the following parameters:
ƒ Number of ports
I/O parameter No. 74 “Qnt Prt Usr Out” (Number of output ports used by TP user [hand
etc.])
ƒ First port No.
I/O parameter No. 75 “Top No. Use Out” (First output port No. by TP user [hand etc.])
(Setting example) When the first port No. is set to 308 and the number of ports is set to 8:
I/O parameter No. 74 = 8
I/O parameter No. 75 = 308
“Usr1” (F1 key) 䍃䍃䍃䍃䍃Output port 308
“Usr2” (F2 key) 䍃䍃䍃䍃䍃Output port 309
“Usr3” (F3 key) 䍃䍃䍃䍃䍃Output port 310
“Usr4” (F4 key) 䍃䍃䍃䍃䍃Output port 311
“Usr5” (F1 key) 䍃䍃䍃䍃䍃Output port 312
“Usr6” (F2 key) 䍃䍃䍃䍃䍃Output port 313
“Usr7” (F3 key) 䍃䍃䍃䍃䍃Output port 314
“Usr8” (F4 key) 䍃䍃䍃䍃䍃Output port 315
66