IAI America IA-T-XA (ANSI standard CE mark agreement) User Manual
Page 66
㽴 Continuous movement
The actuator is continuously moved to the location of the position data transferred to the
controller.
Select the position No. to which you want to move
the actuator first in a Teac screen condition, and
press the return key.
Turn on the servo for the axis to be continuously
moved. (It is not required if the axis is already in a
servo ON condition.)
Press the F4 (Cont) key among the function keys.
(Refer to the following page.)
Press the MOVE key to light up the MOVE status
display LED.
(Pressing the MOVE key first and then pressing the
F4 (Cont) key extinguishes the MOVE status display
LED. Repress the MOVE key.)
Pressing the axis operation key with the axis No. to
be moved makes the axis start to move continuously.
(When moving the axis No. 1 continuously, press the
1+ or 1- key.)
When the servo is ON for all axes, pressing the
ALL+ or ALL- key begins axis movement.
When continuous movement starts, the MOVE status
display LED goes out.
Continuous movement
procedures
First position No.
Return
To stop continuous movement, press the STOP key. (Pressing the ESC key continuously moves
to the JOG operation mode.)
To restart continuous movement, press the MOVE key to light up the MOVE status display LED
and press the axis operation key.
63