IAI America IA-T-XA (ANSI standard CE mark agreement) - Manual (Page 71)

Turn on the servo for all axes and execute jog
operation.
Press the SERVO key to light up the SERVO status
display LED.
Press the ALL+ key. (Servo ON for all axes)
(When the Deadman switch is OFF, the servo is not
turned ON.)
The JOG status display LED lights up.
Press the axis operation key with the axis No. to be
moved (1+ 1- 2+ 2-) to move the actuator to any
given position. (1 and 2 indicate the axis No., +
indicates the coordinate plus direction, and –
indicates the coordinate minus direction.)
Pressing the F2 (Scan) key incorporates the current
position of the axis No. over which the cursor is
located onto the input screen.
Jog operating procedures
68