IAI America IA-T-XA (ANSI standard CE mark agreement) User Manual
Page 128
16-3.
Software reset (restart)
The controller’s software is reset. The data in memory that has not been written in flash ROM is
abandoned.
Select the F2 (SRst) key on the Ctl screen.
Mode flow:
When resetting the software, press the F1 (OK) key.
When not resetting the software, press the F2
(Canc) or ESC key. The screen returns to the Mode
Selection screen.
16-4. Error
reset
The controller’s errors are reset. The message-level and action-reset-level errors are reset.
Unless the cause for the error is removed, the error occurs again.
Select the F3 (ERst) key on the Ctl screen.
Mode flow:
When resetting the error, press the F1 (OK) key.
(Even after the error reset, the screen does not
change. Pressing the ESC key returns to the Ctl
screen.)
When not resetting the error, press the ESC key.
The display returns to the Ctl screen.
125