IAI America SEP-PT - Manual (Page 104)

98
5.2 Each Operation
5.2.1 Initial Window
When the controller is connected, the power is supplied to the touch panel teaching unit and
the processing is started.
In the operation window in the touch panel teaching unit, “IAI” logo mark is displayed for one
second when the power is input. Then, the version data is displayed for three seconds.
After that, the window to be
displayed varies depending
on the condition.
[Refer to “5.2.2 Initial Setting”.]
[Refer to “5.2.3 Menu Selection”.]
In the case that the controller
has never been initialized since
it was purchased:
In the case that the initial
setting has not been ever perf
Display Adjustment
Liquid Crystal
V3.00 or later display
3 . 0 0