IAI America SEP-PT - Manual (Page 129)

123
No. Operation Window Remarks
20 The controller’s position data
is reloaded.
Touch the ESC.
21 Set the forward position
(stop position on the
backward point), the
positions related to it and
acceleration/ deceleration
speed.
Touch the ForwardPos.
When MENU is touched, the
MEC MENU window is
returned.
22 The window is change to the
Forward Position window.
Set the Forward Position
related Position,
Acceleration and
Deceleration.
Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
23 Touch the position value. Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
24 Touch 1, 0 and 0 in order,
then . When the value input is
stopped, touch ESC.
The value will not be set and
the previous position setting
window will be returned.
25 “100.00” is displayed in the
position data section. Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
26 Touch the velocity value. Touching Tb1 return to the
Forward Position/Backward
Position setting window in
the Position Setting window.
27 Touch 5, 0, then . When the value input is
stopped, touch ESC.
The value will not be set and
the previous
“Position/Velocity setting
window” in the Position
Setting window will be
returned.