IAI America SEP-PT - Manual (Page 37)

31
[Velocity Change Position and Change Velocity setting in the Operation Pattern No. 1 (Movement
Speed Changeable)]
The procedure is described taking “Change Position” as an example.
Touch the Velocity Change Position.
Touching MENU returns to the SEP-PT MENU window.
In the example, the velocity change position setting
window for the Backward Position 0, will be displayed.
Touch the value for the velocity change position setting
item.
Touching Tb1 returns to the Tb1 window.
Enter the value and touch .
The set value will be displayed.
Touch the WRT. When there is no error in the input range, etc., the following window appears.
Touch the YES.
The controller data is reloaded.