IAI America SEP-PT - Manual (Page 22)

16
4.2 Each Operation
4.2.1 Initial Window
When the controller is connected, the power is supplied to the PSEP/ASEP/DSEP dedicated
touch panel teaching unit and the processing is started.
In the operation window in the PSEP/ASEP/DSEP dedicated touch panel teaching unit, “IAI”
logo mark is displayed for one second when the power is input. Then, the version data is
displayed for three seconds.
After that, the window to be
displayed varies depending
on the condition.
[Refer to “4.2.2 Initial
Setting”.]
[Refer to “4.2.3 Menu
Selection”.]
In the case that the controller
has never been initialized since
it was purchased:
In the case that the initial
setting has not been ever
performed since the unit was
purchased. In the case that the
“Automatic Monitor” is
set to “ON”:
1
1 It can be set in
the Automatic Monitor
Setting Window in
the Environment Setup
window in the main
screen.
[Refer to “4.2.4 Monitor]
ውዌዌዊዌዌ
ውዌዌዊዌዌ
V3.00 or later display
3 . 0 0