IAI America SEP-PT - Manual (Page 27)

21
4.2.5 Position Setting
(Position Related Data Setting, Jog and Inching Operations)
The data items related to the position such as position, pressing force and pressing width, are
set here. With these settings, the jog movement and inching movement operations can be
performed.
Touch Pos Edit in the SET-PT MENU window.
Before the window is transferred to the Position Setting window, in the case that the password
is set to the value except for “0000”, the password entry window is displayed.
Enter the value as the password using the ten-key and
touch .
When the correct password is set, the window is transferred to the “List” window in the
“Position Setting” window. The display varies depending on the Operation Pattern setting.
Touch the position to be set.
Touching MENU returns to the SET-PT MENU window.
The left figure shows an example of Operation Pattern
No. 3.
The set value for each position, is displayed.
No. of Positions to be set
Operation Pattern Displacement
No. of Positions to be
set
Standard Point-to-Point
Movement:0
2-Point Movement 2
Movement Speed Setting:1 2-Point Movement 2
Position Change: 2 2-Point Movement 4
2-Input, 3-Point Movement:3 3-Point Movement 3
3-Input, 3-Point Movement:4 3-Point Movement 3
Continuous Reciprocating
Operation:5
2-Point Movement 2
The password can be entered in the “Position
Data Edit Password” in the “Parameter Edit”
window.