IAI America SEP-PT - Manual (Page 124)

118
(Inching Operation after the Home Return Completion)
Touching Increment displays the Inching Operation window.
Operations in the “Increment” window
x ĸ ĺ : With a single touch, the axis is moved as much as the set distance in the
“Increment Distance”.
Increment operation to negative direction ĸ or positive direction ĺ.
x Get : The current position is captured. The position value in the “Position/Velocity setting”
window in the Position Setting window is changed to the captured position value.
The conditions for capturing the current position are as follows.
x Home
return completion
x In stop mode
x Current position value of “0” or more
When the conditions for capturing are satisfied and Get is touched, the current
position value is reversed while it is being touched.
x ESC : Pressing this button returns to the “Position/Velocity setting” window in the Position
Setting window.
x Inching Distance: The inching distance is set here.
[Inching Distance Change]
Touch the value for the “Inching Distance”.
The ten-key will be displayed.
Enter the value and touch
.
The set value will be displayed.
The current position of the axis is
shown.
The inching distance is shown.