IAI America SEP-PT - Manual (Page 106)

100
5.2.3 Menu Selection
There are 6 types of menus in the MEC Menu window. Select one of them and touch it.
The window is transferred to one for the selected menu.
Menu List
x Monitor
Controller Status Display [Refer to Item 5.2.4]
x Initial set 2-point Stop, 3-point Stop [Refer to Item 5.2.5]
x Pos. Edit
Setting of Position, Pressing Force and Pressing Width, Jog Movement
[Refer to Item 5.2.6]
x Test Play
Trial run for axis movement check [Refer to Item 5.2.7]
x Maintenance
Touch Maintenance to move to the maintenance menu window, which is the next select
menu window.
There are 4 types of menus in the maintenance menu window. Touch one of them. It moves to
the selected menu.
When MENU is touched, the previous “MEC menu” window is returned.
Maintenance Menu List
x I/O Test
I/O Test [Refer to Item 5.2.8]
x Initialize
Parameter Initializing [Refer to Item 5.2.9]
x Parameter Parameter Setting for Positioning Width Initial Value, etc.
[Refer to Item 5.2.10]
x Envi.Set
Environment Setup such as touch sound setting
[Refer to Item 5.2.11]
x Information
Shows information of operation pattern, version, etc.
[Refer to Item 5.2.12]